Adaptation of HOTEND Ender 3 / CR10 fan duct.
for Mi-Touch compatibility
You need :
- Kit Touch-Mi sensor (with wires and inox screw)
- M3 nut
- 2 screws
You can adjust the height of the Mi-Touch with the screw/nut
For fix the fixed plate magnet on X axis i have use 2 screws in the free holes (i have dumper).
I have create 2 plates.
Normaly the first model is't ok : Mi-Touch_AimantV6.stl
If you need a litte more big plate you can use the second model : Mi-Touch AimantV7-little more big.stl (more 1mm on Y et 2mm on X)
Be careful that if you print near X0 not to get too close the fixed magnet otherwise the PIN go down and risk to clash.
I recommand to print the Duct Fan in PETG or better : ABS.
PLA is only ok for the fix magnet
Orignal part : https://www.thingiverse.com/thing:2879538
If you like it ;)
Amazon Basics PETG