A 30mm base modeled in 3D coat for use with with Shadows of Brimstone board game.
The base is done, I am listing it as a work in progress until I have painted it.
20% or 100% for heavier base
Must use supports to print at 60 degree angle
I designed this in 3Dcoat for Printing as an experiment to what I could do with my printer.
I had originally thought about printing it flat with 0 degrees and no support.
However, it looks like crap in the slicer.
Remember that you get much greater details in the Z axis, I rotated my model in Cura.
60 degrees seemed to be about right.
Below are images in the slicer of 1mm and .05 mm.
Length of print for 1mm is 39 minutes.
Length of print for .05mm is 2 hours.
1mm layer height
.05 mm layer height