Love the original, but I needed a few updates to make it work for me.
I lengthened the screw holes for the top fan so you have more plastic to bite into, I tap them with an M3 tap. You may have to drill out the front two since the only way to print this is with support.
I added a little nub so the Fan option was closer and easier to install. Since this is going on an AM8, the old fan has a pressure fit vent that I quite like, and I wanted to use it. This nub allows you to add the fan with minimal wight and plastic.
I also added 2mm to the thickness of the back end of the mount. I broke the first one and wanted it stronger.
Printed in ABS at 75% infill at 0.1mm layers with supports to build plate. I know it weighs a few grams more, but the hotend just snapped right into place and it feels sturdy.
Oh, the cooling part fan was binding on the centre of the support, so I added some washers when installing it you could add a nut in stead.