MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
This is a Nerf Stryfe ONLY adjustable lipo Stock ... The internal space is about 44x 49x 115mm . However the Stryfe profile and the lid catches reduce that. I can make it longer on request if needed, This is designed for a 2200mah 4s lipo.
The stock is adjustable via m3 thumb screws (different than shown) on 10mmx8mm carbon fiber rods ( 8mm painted rods shown )
Painted rods are shown because it will take more than a month for the real carbon rods to ship to me and i just couldn't wait that long before sharing it with you .. i'll update the pics once i get them.
It's expected that you'll glue the rods into the Butt and end caps.
The stock has place for two additional "support" screws and i strongly suggest you pre drill these holes and use these screws to help to support the weight of the lipo hanging off the back
Print the battery box with the attachment point on the bed .. with supports over 89 degrees .. This means no supports are required for that back of the box .. which is then printed at a 80 degrees angle which i had not problems with but i do have ALOT of part cooling.
I printed the Butt with a 10 degrees angle so it sat flat on the print bed .. without supports other than over 89 degrees ... This also requires significant part cooling.
I printed the box lid upside down .. and came out just fine with good cooling.
The Licnence you agree to when downloading this thing prevents you from making a profit from MY thing. This means you CAN NOT sell this or any of my other things on places like Ebay, Facebook, Forums or Etsy. You also may Not sell My parts as Part of a complete blaster. I don't profit from putting this thing us as a Free download and therefore no one else should too.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.