My take on a dice box. This box holds 3 sets of dice with room to felt the inside. Featuring impossible dovetails for a cool look.
The end dovetails may break off, simply re-glue them with super glue, and then sand the excess away.
I have included a blank top as a STEP file if you want to design your own logo. Feel free to share and I will add links here:
Supports are necessary on the top to avoid sagging in the slots to allow the dovetails to mesh. Print with design up.
Increase wall thickness until the side walls are solid for bottom. Print with bottom down.
If you desire to add felt to the inside of the box I have included a cutting guide for the bottom piece. Trace the inside of the guide on a piece of felt and cut it out, then glue it in with glue. For the walls, measure the depth of the walls and cut a strip of felt that wide. Glue the strip to each wall and use a knife to cut off any extra tail at the end. Glue at each corner well for the best look.