I've been using this mount for about a month now and it's tested and working well.
This mount is designed to be used with Precision Piezo Orion clamp designed by user Moriquendi.
Hotend is E3D V6 with excellent fan designed by user thed0ct0r.
Check Printed_parts.xlsx for STL's used.
Insert M3 hex nuts first under the mount, I could insert them and they would stay in place with friction but if yours doesn't then use small drop of glue so the nuts don't fall out when mounting Precision Piezo clamp.
Make sure to properly tighten M3x20 flat head screws that secure the Precision Piezo Orion clamp to the Zesty Nimble mount.
I left them slightly loose at first and the piezo element really didn't like it and started to act weirdly.
Second thing to notice is that I didn't have smaller screws to secure the Zesty Nimble to the mount so I used those 40mm screws that came with the Nimble and printed small adapters so I could tighten Zesty Nimble to the mount. The 5.20mm adapter has to be filed slightly so it sits properly over Zesty Nimble.
Links to printed parts that are used in this setup can be found in Printed_parts.xlsx.
Also BOM with links to McMasterr-Carr catalog is included as separate file BOM.xlsx.
- 1pc M3x8mm socket head screw
- 2pcs M3x20mm socket head screws
- 1pc M3x30mm socket head screw
- 4pcs M3x20mm flat head screws
- 1pc M3x35mm flat head screw
- 6pcs M3 hex nuts
- 1pc 5015 Radial Fan