For 22 mm motorbike handlebar
List of materials:
- 3 printed parts
- Digital thermometer for freezers and refrigerators (see picture)
- 1,25 mm thickness 45x25 mm plexiglass
- 4 M4 nuts
- 3 M4 L16 mm screws
- 1 M4 L12 mm screw
In order to insert easily the thermometer in the case, you can break the two brackets in each side.
I designed an hole beside the thermometer case in border to lock the metallic temperature sensor. I also reduced the cable length.
An hole is located in the bottom corner of the case in order to drain water