The first prototype of our new design is almost ready to be tested.
A flying wing concept that has been designed primarily to be used like UAV/drone equipped with folding props, flight controller, FPV and HD camera. Although can be also flown “manually” with only two servos, motor and ESC. Two different printing volume will be available: big one 300X300X400(z) and small one 150X150X180(z)
We are searching testers interested in building and flying this model with:
-Enough time to build the model in less than 2 weeks.
-Experience with flying wings.
-Experience with UAV/drones.
–Experience with 3D printed planes.
In exchange we will give to the tester all our designs.
If you are interested please contact us through our website with the subject “EBW-160 tester”
-Max lift to drag ratio- 18 at 45 kmh
-Wing span - 1,6m
-Wing area - 29dm2
-Estimated take of weight < 1,1kg
-Aspect ratio - 8,4
-Airfoil – Root NACA1144 tip NACA0010
Motor: Sunnysky X2212 KV1250 or similar
Battery: 3S or 4S, approx. weight 160 to 250 gr
ESC: Aerostar 30A or similar.
Servos x2: Micro servo size.
Camera: Run Cam split mini 2 (not necessary for tester)
Flight controller, VTX, GPS, pitot tube: To be defined.
Push rods: D1,2
Tape or nylon hinges.
Screws: M2X8 mm (approx.)