This is an upgrade I designed for the Anycubic 4MAX 3D Printer. It adds a better viewing angle, and you can insert/remove the SD Card without opening the door. The 4MAX is an awesome 3D printer, but I was having interference issues with the card reader/graphics board at its original location where the board could not read the SD Card. After lots of troubleshooting, I discovered that moving the graphics controller away from the enclosure solved my problem. I suspect other 4MAX users are having similar issues such as the printer stopping before finishing, erratic xy movements or even scrambled display. I also added spacers between the screen and the main board to eliminate flexing when mounting. Please post your makes. Thanks
Added (12864_LCD_Graphic_Smart_Display_Controller_Board_Case_4MAX_v2). If you're having trouble bridging the SD Card slot, use this version. It has a modified SD Card slot opening with little to no bridging required.
All parts were designed in DesignSpark Mechanical.