Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

JopieLoempia

Modified Nintendo Switch Joy-con grip (remixed)

by JopieLoempia Dec 15, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I printed just the rail at 98%. It was still too loose for the joycon and also since that shrunk all directions it no longer had the correct length. Similar to threeclaws

I printed these on an Ender 3 with the Y scaled at 96% to fit my Joycons. Could be about 2% longer I think But good enough for me...Tweeked the buttons and did some file work to fit them... Nice set up ... Played very well.

Gave these a shot but even at 96% they are still too big and at that reduction they really didn't fit right anymore. Going to give the originals a shot now and see if they have a better fit.

This was on an accurate (near perfect calibration cube and I have no issues with the surprise eggs) ender 3.

I had to print it at 97% and the fit was easy to get in, but not too easy to get out. 100% and it was really sloppy. I would probably do it at 96% honestly.

These are MUCH more comfortable than no grips or other basic grips I've tried. I wish the grips were a little larger though.

Hey nice job with this remix. I printed it on my CR-10 at .2 resolution with 30% infill with no problem. I also experienced the Joy-Con being loose in the grip allowing it to slide out easily. I'm printing it now at 98% scale and hopefully that will fix that. Also I printed it on a RAFT as the overhand of the handles concerned me. Once again thanks..

Printed this and it came out great. Joy-Con is a little loose so in the future I may print at 99% or a little lower resolution. Otherwise, love it.

CR-10S
.2mm layer height
15% infill (might increase for more weight)

Good to know. I'll put it in the description. Results vary so much with printers, nozzles and material. I have quite a cheap Prusa clone which makes for a tighter fit because of lower dimensional accuracy.