Rotating platform for painting figures. The platform has a diameter of 15cm. It consists of 3 elements (Printed top and bottom) + bearing
What you need:
- 22mm diameter bearing, 7mm thick, 8mm center. Get rid of that dusty fidget spinner you have laying around ... also skateboard bearings
It turned out that the platform was great for scanning objects in 3D using the phone and Qlone application
The platform is designed in such a way that there are no empty spaces when printing with a diameter of 0.4mm. If you set the outline for 3 walls - 1.2mm, it will fit perfectly.
A 100% fill is needed to obtain a painting board's color.
Approximate print time:
Platform up - 3.5h
Platform down - 1.5h