Pickle Rick in Color. Need I say more?
Add supports touching the build plate. Printing 3 Pickles will break even on the waste block. When I was somewhere around 31mm layer height I manually pulled out the green and swapped for a lighter green to get 6 colors. This isn't needed but a nice touch.
At 33mm you can pull the white and swap for black to color the pupils. I decided to just use a sharpie instead.
Adding a small 1mm brim improves supports
Green was esun. Black Hatchbox. White was protoparadigm but that was troublesome in the MMU. Red and Blue are AIO Robotics.