MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Xmas Wrapping Paper Cutter Remix (for Large rolls)

by Rectangle Dec 6, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I can't seem to get this to print with enough room to get the blade in...

Oops! I was trying to shove the #11 blade in... I found an alternate version kicking around for #11’s.

Large Diameter Wrapping Paper Cutter for #11 blades

Dang, that doesn't sound good. I followed the instructions here: https://www.thingiverse.com/thing:3188888 for installation.

Another option to get it installed would be to heat up the handle of the blade a little bit then press it into the printed part. Or maybe safer, just put a heat gun to the notch on the printed part so it gets soft enough to press the blade into. In both cases be sure to avoid heating too much.

Xmas Wrapping Paper Cutter (remix)
by Aero3D

What's that wrapping paper station thing you have here? Looks interesting - how does it work? can you post a larger photo of that? :)

This is a wall mounted wrapping paper station. Made with 1" x 4" wood boards, 3 ft threaded rods. They are mounted to the wall only at the top with a 1" x 1" board screwed into the wall studs that the frames slide slide on top of.

Thank you for doing this guessing it takes the 10A blade correct?

Correct, it should be the same 10A blades as Aero3D's model