This is simply a remix of three things so that you can live your best life and play your Nintendo switch while laying in bed.
Shout out to the original designers for making this creation possible!
I printed all the blue parts with 0.3mm layers and 1.2mm walls, tops, and bottoms and 20% infill. The male threads on the arms came out a bit lopsided so 0.2 mm layers is probably preferable. I printed the knobs with 0.2 mm layers and 20% infill, and for the two rods I used 0.2 mm layers and 30% infill for strength. Using four arms seems sufficient for now but you may require more if you don't want the screen so close to your face.