This is a front loaded GoPro Mount for your GEPRC KHX/KX Series.
It fits perfect in the Alu front Cam Frame.
Use TPU. I tried to design it to print as easy as possible. You need Support, but only for the noses which go into the nut of the front Cam Frame. The hole fits for all 5mm diameter Standoffs. It is designed to be printed looking up.
With my Sainsmart TPU, 60% Infill is perfect for a tight look and enough flexibilaty to get the Cam out if you want.
Priority number one is safety of the GoPro. You still will see Props in the Image and the mount ist probably in the FOV of the FPV Cam. I have a Foxeer Predator v3 mini and it comes with a bracket with 3 mounting holes on both sides. Usually you would use the middle ones, but when you use the top ones the Cam comes lower and the mount is less in the FOV.
I did not have this in the air now so I don't know how this performs in the air.
If there is anything you want to change or you want this Mount for a different Frame hit me up!!
EDIT: I addet a few Versions with less uptilt. GEPRC specifys the GoPro uptilt with 33°. I think it's a little more. Anyways: I made mounts with less Uptilt. -10Deg means, the GoPro looks 10 degrees further down.