MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Wall Hook #5

by SE_2018 Nov 17, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Can we have a version without the screw holes please?
Just wanting to use double sided tape for a cleaner look.

I have uploaded four versions for tape: Wall_Hook_5_36mm / _44mm / _64mm / _89mm

Awesome! Thank you so much!!!
Will post a photo when I make them!

two inputs:

  • I think you know that. but I would use cheap tape. with good tape, it may be that if you remove the hook later, you will tear off the wall plaster.
  • on the back of the hook was originally an edge. I have removed it now. for a perfectly clean design, a small edge might not be bad. how deep the edge has to be, relates on the tape you use. Within the edge (surface) the tape can be attached. So you can see from the outside no gap between hook and wall. You have to try that experimentally.

And yes, i would love to see the hook in reality .. :-)