Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

shink

Reindeer card kit

by shink Nov 13, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

everything printed perfect for me, but the slot on the head was too narrow, had to open it up a bit with an x-acto. all other joints we fine.

thank you .....nice print

This was great. Thank you! Printed w/ 15% infill, no problems at all (printed the reorganized one).

FYI, your reorganized one gives me issues in simplify3D, it will print weird thing around the bottom of the main body and by one of the horns. This is the only one that does this for me, the other 2 work fine. PM me if you'd like pictures etc

I had the same problem. I used the Repair menu in S3D and selected "Remove duplicate triangles" once and then "Remove orphaned triangles" once. That fixed it for me and it prints well. (Note you can keep removing orphaned triangles and it turns into a mess. Don't do that.)

Would love to see it in our laser section :) https://3dpassion.com/models :)

did you notice you have 3 left feet and 1 right? i recommend you flip the one in the bottom left of your picture... ;) i know they are symmetrical anyways, but they all have a good side and a bottom layer side, so you should have 2 and 2 on the print...

Thank you for information.
I didn't know that there is 3 left legs. And there is 2 Right(left) horn too.
I had uploaded Organized version to see symmetrical easy.
Thanks to your advice, it looks a little more beautiful ^_^.

no problem! and the truth is.. it would look even better if you flip the main body.. then it will have a good side that faces the same way as both the antlers do now.. so then looking from the direction in your pictures it will have all nice (top layer) sides facing the camera ;)

and once ya fix that, dont forget to update the thick version too ;)

Thank you for comment ^_^
I uploaded separated version.

If you want scale up model , please try this https://www.thingiverse.com/thing:2686435
If print this on a 1/10 scale, it is twice the size of this page model ....body length is 180mm thickness is 1.8 mm.
If you double the model of this page , body is 180mm ,thickness will be 2.4 mm. SO you can save filament 25%.

Reindeer (3D print for desktop or woodwork with life-size)
by shink

Wow, thanks! The scaled up one is way too big for my printer though :-). Although I might have an 1 meter by 1 meter 3D printer within a year.

EDIT: I think separate6_rear_leg_x2.stl is the wrong file?

Wrong. I mistaked . please wait.

Hi, great design. If it's not too much trouble, do you have a version without the frame and connectors? Just the parts?

This prints great. A minor problem is getting it off the bed intact.

Thank you for comment.
I added the "thick frame version" for you . But it needs a nipper.^_^