Card kit model of reindeer.
Re-Design of my model 2686435
Easy to print.
"thick frame version" is added frame thickness, to avoid unintentional breakage.
[Assembled] W90 x D30 x H90 mm
[Card (Original )] W118 x D78 x t1.4 mm
[Card (Organized)] W148 x D78 x t1.4 mm
Material: ABS,PLA about 8 - 9g
If you want to display with some LEDs please get it from here
Indoor [AliExpress] [Banggood]
Outdoor [AliExpress] [Banggood]
11/21/2018 Separated : If you do not need frame , print separated set.
11/22/2018 Update separated part 6. Correct wrong part.
11/25/2018 Organized version is uploaded.
12/11/2018 Optional sleigh is added https://www.thingiverse.com/thing:3273319
Thank you for many reports of "MAKE".
And I noticed that some models were not correctly assembled.
The slits of each plate must be inserted to the end to each other.
This means that the all ends of the slit must touch each other.
If incorrectly assembled, the height of the reindeer will be higher than I designed.(T_T)
If your model is too tight to assemble, please try setting the thickness (= height of z) to 90 - 95%.
It will make the thickness to 1.26 - 1.35 mm (the original thickness is 1.4 mm).