MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Amazon Echo Show 2 stand

by FearAndGonzo Nov 18, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Comments deleted.

Thanks so much for publishing this.

Is it possible to provide the original CAD file as I would like the Show's screen to sit at 90 degrees to the horizontal as I have it placed up high?

Or any chance you can create an STL which has this increased angle please?

I added an IGES export to the files section. Just to maybe save you some time... I did this originally to 90 degrees for the same reason, I put mine up high. Because of the weight distribution I was a bit scared it could fall forward, and because it sat on the plastic of the Show instead of the rubber pad on the bottom it rattled terribly from sound. You could probably solve the rattle by adding some rubber or cloth between the stand and the Show, or I just used this slightly more leaned back angle to have it use the built-in rubber pad instead. Try whatever works best for you!

That's great! It sounds like you have thoroughly tested it at 90 degrees so I think I'll print your original STL for now and then decide if there is anything to be done to bring it to 90 degrees.

Thanks for your design!