MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Sonoff DIN 35 Mount

by Blade893_uk Nov 1, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

This is one of the best sonoff mount solutions. Could you share the source file, or modify it to be compatible with POW/dual? I would be appreciate...

If you can provide me the dimensions of the device you want a mount for I can adjust the model to fit?
I would need the over all size and hole locations.


поставил 80 % экструзию , первая деталь сразу отлично, но болтается на din рейке .... у вас есть исходник ? можете поделиться ?

слипаются части и не двигаются . печатаю abs / скорость уже ставил 10 мм

Я создал новый файл для вас, который имеет больше свободного пространства вокруг слайдера. Пожалуйста, попробуйте ТА под названием DIN-Rail-mk7-Larger-Tolerance-Correct.

Любые проблемы, дайте мне знать.

I have created a new file for you that has more clearance around the slider. Please try the SLT called DIN-Rail-mk7-Larger-Tolerance-Correct.

Any problems let me know.

Попробуйте снизить коэффициент экструзии в вашем слайсере до 90%

выложите две части отдельно друг от друга ..... потом склеять

Вы испытываете трудности при печати?

Нет должен быть напечатан за один раз.

No should be printed in one go.

Is it possible to use this mount also with a Sonoff POW or are the mounting holes different?

From looking at a POW I would say this mount is not going to work.

The spring section does not come loose when I print this. Are there settings I don't know about? Printed in PLA, sliced with cura. Thanks

here is repaired version, cause it wasn't fully printable

Дякую! your repaired version is OK. Original wasn't to print spring area (

Thank you for the comment. I have replaced the damaged stl with the one fixed by GarRemMash.