Hit Location Dice D12
This dodecahedron is something I made for playing D&D with friends.
It's a little on the large side for easy reading and printing; 65% scale is closer to what you would find in a store but obviously harder to paint. The single die is hollow, but with thick walls so printing should not be a problem, even if your printer does poorly with bridges.
I have included a jigsaw version. Be warned it is incredibly difficult to put together even with the tolerances, but if you have the patience then it might be fun!
UPDATED 30-Oct-18_10-32 - Added a solid version of the single piece for a convenient alternative.
UPDATED Feb-11-2019_17-39 - Added a solid version with the standard hit locations as per user request "diceHitLocation01B_standardFinal.stl".
I suggest 0.2mm resolution and 25%+ infill for the single dice.
The jigsaw version has various .stl options for printing: all, halves, or pieces.
License: Creative Commons, Attribution, Non-Commercial, No Derivatives, All-Rights-Reserved
Like what you see? Consider donating! PayPal.Me/ricktress