I wanted to reduce the noise coming from my steppers during prints at night but wanted to try to print in TPE instead of buying the dampers. The hardware required for the x-axis spacer is hard to find and needs to be 3mm longer than stock to work with the stock x-axis cover and end-stop mount.
This x-axis cover pushes the hardware deeper into the unit giving you space for the included flexible spacer that acts as a vibration damper between the metal mount and your stepper motor.
• Remove the 4 bolts holding on your existing x-axis cover to your stepper motor.
• Remove the 2 screws holding in the end-stop into the cover.
• Use the 2 screws to mount the end-stop into your new cover. (Be sure to go slow as you will be threading the screws into plastic and creating threads)
• Undo the 2 grub screws on the cog of the stepper motor and slide the cog on its shaft 3mm away from the stepper. Tighten the 2 grub screws.
• Place the flexible spacer between the stepper motor and the metal mounting bracket.
• Use the 4 stock mounting bolts to mount the new x-axis cover to the stepper motor.
Enjoy and post your makes!
If you found my Things useful, treat me to a cup of coffee by using the PayPal button below :)
Posted v3 of the X-Axis Cover with an added opening for the end-stop wiring.
Inland PLA, TPE
Green (PLA), White (TPE)
Print the spacer in a flexible material and the cover in a PLA or equivalent.
You can also print this spacer for the Y and Z Axis steppers. Although much easier to find, you will need longer hardware for those steppers.
TPE Dampers and PLA Cover printed
Spacer installed on the Extruder Stepper
Spacer installed on the Z stepper