Because i'am bored with modern christmas lights. I maked the imitaion of historic russian christmast lampshades, which we had at home. Lampshades go into the standard christmas lights. I miss them, therefore i maked it.
Plasty Mladec PLA; HTPLA recomended
White or transparent
If you print it at glass board 10mm brim is necessary. Your printer can do a distorion, Its necessary to know, how many, and work with it and add a clearance 0,2mm otherwise lampshades not go into lights.
This is a decoration, not a toy! If you think that anyone eat up or breathe it, please don't print it.
Print temperature 205°C/60°C If you have a MK8, print three and cooldown hotend, otherwise it will be cloged up in iron beyond the hot end.
To remove from bed at <55°C and remove brim.
Put lampshade on socket so as source of light was in lampshade where is ribbing highest.
If it not going, warm moderately lampshade, and when is soft, pushing rotary on the right spot in the lampshade.
This is going in case normal PLA, In case HTPLA is necessary customize in thinkercad for example. Be carefull!
I touched on it after 11 hours of lightinng, it was cold on outer side.