The valves of this 2 way valve tend to settle and get a little bit stuck over time. In that condition the short levers of the original are a bit difficult to operate. The main goal of this Thing is to provide longer levers so that it is easier to operate the valves when stuck.
I use this 2 way valve to mutually switch from one hose to another. I thought it would be a good idea to have only one lever that operates both valves. So this lever now opens one valve while closing the other. I designed it so that the lever points into the direction of the valve that is open.
You can use the original screws (M4) to mount the new lever/gear.
If you only want the lever you are free to use the provided FreeCAD file and delete the gears.
This Thing fits the 2 way valve of the brand GEKA, part no 331CSB, EAN 4015933013535.
noname PLA PLA
The lever needs support for the gear. The part without the lever can be printed without support.