| My revised version of the soap bubbles machine |
- 3D printed parts
- MG90S, SG90 or HK15178 servo modified for continuous rotation
- Computer fan Frame size 92 X 92 X 25 mm (3.6 x 3.6 x 1 in) >50CFM
- Power plug
- 12v Power supply (Plug or battery)
- Small 5v regulator to supply the 5v to the servo (must adjust regulator prior to wiring to servo)
- Misc hardware
The print has been divided into several parts. The liquid tank is not hermetic now!
It is used to seal with hot glue, or to insert a further tray inside it.
(Soon I think I will draw the additional tray.)