This project used the original model Masonic Compass and Square (https://www.thingiverse.com/thing:2960220) by Shepherd1. Show love liking the original design. Thank you Shepard1.
It was different than the other projects. Copied the original 3 times to make the walls and angled them into a pyramid, Added a bottom, hole, plug, and slot. To print it, added supports that easily cut away.
Printed cleanly except for the first layer of the plug base...so I added another support.
This was printed at x1.1 file size which will fit on an Ender2 bed. It holds $20 USD in dimes and quarters. The top slot will only pass dimes. I made a plug with a slot and all coins will pass through it through the underside.
The pictures at the end show the model with the supports and skirt on the contact points to the bed to hold all in place during the print.
- Added a file for a tea light plug Samyo Tea Light offered by Amazon (30 mm diameter x 25 mm) that converts the model into a night lamp (see makes). Standard x1 size. also, for a x.9 file.11-25-2018
If you have any questions or suggestions, please let me know, Thank you for looking. Enjoy!.
3D Best PLA
10% Bank; 50% Pug and Key
Printed at 50 mm/s with 3 walls; used a 20 line skirt.
I added quite a few supports to the model so you won't need to do this.
Cleans up easily. Plugs pop right in...may have to file the plug and hole to lock.
Used Tinkercad and Cura....in Tinkercad, find Dadmezz, copy object, select ungroup to see the construction steps.