Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

purakito

X-MEN 90s Cyclops

by purakito Oct 22, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Hey can I remix this and sell it and give you half credit?

Hi.
Not intended to disrespect you but NO. I'm making these to share for free with everyone here.
Sorry my friend but unfortunately I can accept your terms.
I hope you understand that is not personal. If someone asks me tomorrow about selling stuff
I'm going to answer the same way.

Cheers~

Do all y our figures require supports or something? I can't find anywhere in the details how these should be printed.

Hi~
Well, depends of how you going to print. Depends on the orientation, the settings of your printer, if your printer can handle well overhangs. Normally your slicer will analyze all the overhangs and show where supports are needed. I recommend the use of supports in every models.

Thanks for the info. So I printed with supports, standing upright and it came out pretty decent but lots of support post print leftovers i need to clean. I think I am going to try another test print with it on its back. to minimize the supports.

Also super kudos for you taking the time to print these outs. I will be sure to tip =)

Hi there~
I'm doing some tests with custom made supports to optimize and decrease the excessive waste. And to help some critical hanged parts like Wolverine claws for example. After the test I'm going to update all my models.
Thank you for following and for you support! Good printings and Cheers~!

.. TY for the Tip you're great ! <3<3 ;D

Absolutely my pleasure, keep doing what you're doing. =)