This design is intended to be used for kitbashing and parts only - please support the official model.
-Scale issues have been fixed. All files are properly scaled and ready to be printed.
-Back 3 and Front 6 have been added
-Added "11" to the back of each leg file. This is intended for a future release where feet and upper legs will be exchangeable. For now, simply disregard the last 2 digits.
There are hundreds of files included in this thing. In order to understand how to use them you will need to download and use the "Terminator Factory" excel file first. When you open the terminator factory file you will see this: https://cdn.thingiverse.com/renders/05/1e/31/a4/88/4a47a0db6e60853dedfcfdf08a5ca249_preview_featured.jpg
This screen allows you to select what parts you wish to include in your custom terminator model. Simply select the desired part in the drop down menu and the images should update accordingly. https://cdn.thingiverse.com/renders/d2/90/3a/23/73/fb5c81ed3a220004b71069645f112867_preview_featured.jpg
While the upper body of the model may be downloaded in independent printable parts the legs have been uploaded in all possible combinations of pose, armor and decorations. Each pair of legs is given a six digit code which you will need to match to the corresponding stl.
This file was designed in Microsoft excel but can be converted to similar formats, however, thees formats might not support excel code. If this is the case you will need to open spreadsheet 2 (Bits) and select your desired parts manually. Legs are coded in this fashion: Position#, Waist#, Right leg#, Left leg#. For example, if you decide you want pose 5, waist 2, right leg 4 and left leg 1 your coded STL # would be 524111.
For ease of building I have extended the top part of the shoulder on each arm model. This gives the top of the arm additional material that will need to be carefully shaved away or clipped off. When building your model cut down this area until the arm you are working on fits on the body at the desired angle. More material removed creates a sharper angle.
LESS IMPORTANT BUT STILL GOOD
Weapons and other accessories may be found here: https://www.thingiverse.com/thing:3164311
Tipping is greatly appreciated and proceeds will be used to purchase material and upgrades so that I can bring better and more detailed parts to the community :)
Example models were printed on an Ender 3 FDM printer using a 0.04mm layer height. These prints used a 0.2mm nozzle.
Remixes are highly encouraged as is sharing the model with attribution. However please do not sell thes files. They are free and always should be.
Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for personal use as proxies and should never be sold. If this item causes copyright issues, I will remove it.