This vertical stand for the PS4 Pro is based on my previous stand which already had the vibration dampening and works like a charm, but... it's not very nice to look at. So I did another vertical stand which looks hopefully better than the first one.
Just like the other stand, this one uses the same dampening balls:
300 g - https://hobbyking.com/de_de/vibration-damping-balls-300g-red-8-pcs.html
200 g - https://hobbyking.com/de_de/vibration-damping-balls-200g-yellow-8-pcs.html
150 g - https://hobbyking.com/de_de/vibration-damping-balls-150g-blue-8-pcs.html
I also added the STL and STEP file of the dampening balls, so you can design your own and print them from TPU. Or just try the one Symio did: https://www.thingiverse.com/thing:2790223
You will need the following parts:
After printing the "Stand_top" part, you can still decide wether you want to print the logo and glue it in place or just paint the lowered surface of the logo. When gluing the logo in place make sure to align the logo parts with the visible surface facing down on the print bed for a better surface finish. The parts also may require some post processing.
When assembling the parts, you should insert the dampening balls into the top part first and then in the bottom part. It's a little fiddly, but will work.
Choose your favorite PLA / PETG
No Supports needed so make sure to disable them and align the parts properly.