This design was reduced in size and made the face and hat two different heights so that it could be printed with two different colors using one extruder. The base and face are done first in orange PLA. It is 1.6mm thick and printed with a layer height of 0.2mm. An M600 is inserted just before "; layer 9" in the gcode for the filament change pause. Black PLA is used for the remaining layers.
If you download or collect this model, please “like” it. Thank you.
0.4mm nozzle, 0.2mm layer height
<a href="https://www.atomicfilament.com">Atomic Filament</a> PLA
orange & black
The print temperatures are 200C hotend, 65C printbed. The nozzle was a 0.4mm.