This is an mount on the CR-10S 3D Printer, to Mount a Bondtech BMG and a Slice Engenering Mosquito Hotend in a direct drive configuration on the CR-10S, as well as a 40x40mm Fan mount for part cooling
Parts are designed in Fustion 360
https://youtu.be/4P0DP0k8bCI Video link for the project
Version 2 of the files have been uploaded.
New Main mount that allows hotend to be facing the front (for hotend fan mount)
40x40mm fan adapter for Hotend Cooling
2 types of Blower style fan mount - Direct airflow and semi-circular fan duct
3 part Adapter for mosquito hotend to clamp inside the Bondtech extruder.
1 part goes up into the Bondtech, one goes in the small circular hole in the mosquito, and one is the main adapter that screws onto the mosquito
define X_PROBE_OFFSET_FROM_EXTRUDER 40 // X offset: -left +right [of the nozzle]
define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
define MIN_PROBE_EDGE 20
ColorFabb XT ColorFab XT
Print with supports, 4 peremeters for rigid part as M3 bolts are used and are fastened into the plastic for PartCooling Fan
remove support on the main mount