Added a picture of the actual lower, more to come once I finish my 40k parts

I was looking around for a new stock for my Ruger 10/22 and the options were limited so here we are ... I just combined the MAXIS stock with Uriel's Gift and made a few modifications to make it more practical.

Just a note, my 10/22 has the iron sights removed and a pin on flash hider (does nothing). This may change the fitting of the barrel since the sights will definitely not fit in the barrel shroud.

If anyone knows how to remove a pin on flash hider please enlighten me, I've removed the pin but the damn thing won't come off!

Update: I've cut the model into 3 main pieces, they're held together with 8mm nuts and bolts and the stock should be glued to the lower.

Update 2: The barrel length can now be changed by printing more or less segments. All parts have been cut into smaller pieces and labeled. Looking for a better way to attach the top rail to reduce the possibility of it not being straight.

Update 3: The stock is stupidly short, I've cut it into 3 pieces so, like the barrel, it can be a custom length (segments of 35mm). I also made the center of the stock solid, before it had a hollow inside which made it weaker. The receiver fits for the most part, I had to use a soldering iron to make small grooves for the safety though.