Fully functional Off-Road wheels for your longboard or skateboard. A little remake of the first model I uploaded to this wonderful web.
- Diameter 111mm
- Width 67mm
Plus, the rim has the same dimensions of the Street Wheel's rim, so they are interchangeable! You can choose :) (see pictures). Link to the street wheels below:
Also, in case you like e-skates, both rims have 3 holes to mount a 34 teeth pulley for a HTD-5M belt. Link:
Important DISCLAIMER: I've designed this objects to be 3d printed, don't forget that. Even if you use the world's best 3d printer, they're still 3d printed objects, and should be managed with caution. I do not take any responsibility for the use you give to them. So please, BE CAREFUL okey? :)
If you like my designs and want to stay tuned don't forget to follow me! :D
Okey, so you are a brave person and don't care how many hours it takes to make a good, sturdy wheel...just kidding, but they are big pieces, so take in mind many hours of printing.
These are some tips to make a good wheel:
- Material: PETG
- Number of Perimeters: 3
- Infill: 20% or more
- Support: yes
- Material: TPU with 95A shore hardness (Thanks to shapenerd for the info!)
- Number of Perimeters: 8
- Top & Bottom Solid Layers: 8 minimum at 0.25mm layer height
- Infill: something between 20% and 30% (this tyre has more volume than the street wheel, so maybe we need more toughness) depends on the weight it's going to hold.
- Infill pattern: Rectilinear
- Support: No need
Same as the street wheel: Put the rim into the tyre. That's it :)
Enjoy your new wheel!