This is a very simple mount for the Titan extruder in bowden. I wanted to mount it on a 8mm threaded rod. So I designed this. It uses the mount support supplied with the titan (at least mine, which is a chinese clone). Please, check that your mount support has 30mm between holes axis.
Print 2 copies of it, tap the small 2,5mm holes in M3
and then screw it.
You'll need: 4 x M4 screw with nuts to fix it, and 2 x small M3 screw to block it in rotation.
Take care to configure your slicer to fill the small holes (with either thin wall extrusion or fill gaps mode).