i uploaded the updated version(marked as v2) from LMF5000 of this clamp, that should better fit the diameter of the Kossel Plus. Thanks LMF5000
i made the following modifications:
- reduced overlap with heated bed
- changed screw depth so that my original screws fit
- reduced tolerance on guide rail for heated bed.
Remark: you need at least 3 of them. 2 original, 1 mirrored. See picture. Or you can go with 6, 3 normal, 3 mirrored in slicer. I have only tried with 3 and 3 originals. Rock solid, no bed movement.
Suggested material: ABS. PETG also works if you do not go over ~70Cfor heated bed.
CAD Link for modifications