As soon as I saw the new Jurassic World movie I knew I had to recreate the containment unit they use to store the Indominus Rex bone. This model took about 2 hours to design, and many more to print. This is a work in progress so I will be updating this and adding files as I move along with the final prop build. Check it out!
*Update (4/25/2019) : It's here! I finally got around to making a final model for the bone! I cut the bone into 6 segments. Haven't been able to print it yet, so while there are hopefully no fitment issues, I can't make any guarantees. I would suggest printing the "Bone_Base" first so you can check fitment with the "Rubber_Rib_Gripper" it fits into.
I used adaptive layers in cura for a lot of these parts, which let me bring print times down but keep all the different radii looking nice. I used ABS because I have a ton of it, but you could obviously use pretty much any material you like. Up to this point I have not had to scale any parts for them to fit - they are all large enough that shrinkage didn't affect the tolerances too much. Do note that, while there is an STL file for the glass tube, I plan on using a 6 in OD acrylic tube with an 1/8 in thick wall for the final prop.