CR-20 branded version added.
I have added an unbranded version of my tool rack, for those who have requested it. I have also added a place for the little screw driver. Enjoy! :)
Just a quick little tool tray that I threw together for the Ender 3. This will most likely fit the CR 10 as well.
This tray will house all the tools that came with the Ender 3 besides the little screw driver thingy.... because I forgot to add a place for it. It also has a place to keep an average sized glue stick.
Remove right side end cap on top rail of the Ender 3 and slide tray on. The Ender 3 text should be at the front and the actual tool tray will be at the rear so it doesn't foul with the extruder when it's up high.
The tolerances are tight. Do not increase print size as the notches provided will not fit into the slotted rail. As mentioned, it's already tight, but it will fit.
2 screw holes are provided at the rear if you want to use screws and t-nuts to further secure the tray, but I personally didn't need to use them.
This is my first thingi upload, so be gentle. :)
3D Fillies PLA