This is a 3D printed twisty puzzle that I designed in Fusion 360. It turns okay without any post processing other than support removal.
V2 will be out in a few days! I will also make a cookie cutter so you can make your own 3x3 shapemods. I already made a mastermorphix!
If you print one (or more!), please post a Make! :D
Filaments.ca EconoFil PLA, but ABS will work too
You may need to drill out the holes in the center pieces, but I just used a screwdriver to widen it.
Check this out for how to get better, easier to remove supports!
MKI V2.0 Not released, it has looser tolerances. If you want it, comment or message me.
MKIII Releasing soon. See a 3D model of it here: https://a360.co/2IPwfBQ
This was originally designed in 123D Design, but I remade it on Fusion 360 for easier customization and changing.
Print 8 corners, 12 edges, 6 centers, and 1 core.
The screws I used are DaYan 3x3 screws with springs.
You can choose between the regular parts, or the 'stickered' parts, which have an indent on the outside faces for colouring with Sharpies or other markers. There is also a DXF file for cutting stickers.
Assemble just like any other cube.
Print all parts in the orientation shown in the photos.
Things to Know:
This puzzle pops often, even of you tighten the screws. I am working on a V2 version which does not pop as easily. Click the 'Watch' button to get notified of a later version.