I was happy with the simple fang I was using and was blowing air nice, but as im using now the BLTouch the old fang didn't work anymore.
One of the most popular I try it result in a poor airflow, I was not able to find one that works properly for my printing speeds until I found this fang, somehow the airflow its superior on the stupid tall and strong fang so just 1 fan its enough. I was refusing to use 2 fans.
I remixed the stupid tall fang from Searchworlds adding the bracket for BLtouch plus the supports from chito.
Im using the 40 mm fan support included because in that way I can just snap and remove the fan easy for cleaning and inspection.
The BLTouch bracket its adjustable in case you need to adjust the high.
Worked perfect for me, im not a designer so may not look nice but I was looking for functionality mainly and it works.
Fan size 5015.
-Added a fan cover with a led light holder (led stripes)
-Added a cable cover just in case you ended with a mess o cables like me at the top of the fang.
-Added a led light cover just in case your leds are to bright as mine.
If your printer can handle it the fang doesn't need supports
The brackets may need supports.
Mine was printed in hatchbox PLA I have no issues with temps im using 5 top/bottom and outline perimeters.
If you need more information please check the original models sources. (screw sizes etc)
Reference to the explosive image
-Yellow parts can be PLA specially the part that holds the fan, since its a clip flexibility is almost mandatory.
-Red parts heat resistant material is recommended
-Green parts can be any but if your leds are to hot you may need a heat resistant material.
The led cover its optional I made it because my leds are to bright.
The cable cover its optional anyway is just print and snap in place
Led/fan cover its optional, for power the leds you can use the cooling fan power lines since that one its always on. Led cover and the leds its better if you use any strong glue you like specially if your leds like to get hot.
The leds used was this type that can be cut.