MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Clip-on Top Spoolholder for CR-10 and others with 20mm Aluminium Extrusion on Top

by BrainMcFly Aug 26, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Good work!
Can you use the stock metal horizontal cilinder to hold the spool instead to print this or does it have a different diameter? Thanks!

it does not fit, diameter is not the problem, the spoolholder is wider than the length of the original cylinder

Oh... I asked this because I would like adding a bearing cilinder to reduce the friction between the tube and the spool, and there are bearing supports for the stock cilinder.

In my first try, ive had a cylinder with bearrings too. But the friction was much to low and the spool does a turn much to far and the filament starts to tangle (you need just a short feeding movement and the spool did 3 or 4 turns). So you need some friction to prevent excessive movement of the spool.