This is a working Remix of the original. I have remodeled this in time. NO SUPPORT will be provided. It is working model and am using them. Pancake motor used.
For the Ender-2, needs the Y gantry to be moved forward 12mm as seen in the pictures to keep the print area centered.
The Tevo Tornado Mount is similar but thicker back plate because of the protruding screws. You can use the spring mounts for the BLTouch only for the Volcano version mount.
I am using this 40mm hotend mount.
PRINT ALL PARTS in PETG or ABS as these will warp when printing materials 220c and up. Happened to me, lesson learned.
Only BLTouch leveling is developed here.
This remix mount is very light weight.
-Recommend to Use this 45° angle fan duct:
-Updated 5015Nozzle45BracketVolcanoTornadoMount for proper clearance
-Updated 5015Nozzle45Bracketv6-Ender2Mount for proper clearance
-added the Orig Prusa 45° angle fan duct.
-5015 Volcano Fan Duct Bracket for Tornado Mount
-5015 V6 Fan Duct Bracket for Ender-2 mount
-Confirmed by OneEyeDesign that it works on a CR-10.
-Uploaded Fusion360 File. Warning: Use it at your own risk. It is VERY MESSY!
custom probe location
X= -30 Y= -5
Print ALL with PETG or ABS to prevent warping.
No supports needed.
For PETG, 100% fan on layer 2 above.
Use appropriate length M3 screws.