This is a Long-EZ aircraft i desgined using some wire frame images.
I created a "smoke stream" stand for added realism.
This model is as acurate as i could make it and is an exact 3.5% scale of the original.
There are two fuselage versions to choose from. One has the canopy and the other has the canopy removed as a separate part. Choose which ever fuselage file youd like to print.
Just use a bit of super glue or hot glue to do final assembly.
The two halves of the fuselage glue together, use the alignment pins to help.
Next glue on the rudders.
Use a standard paperclip ~1mm wire roughly 50mm long to attach the propeller and aircraft to the stand.
Glue the paper clip into the stand then simply slide the propeller and aircraft on
If done correctly the propeller should be able to spin!
For the last bit of realism, I used a Sharpie to color in the canopy and propeller.