Now includes a lower resolution Azorius face that is printable with a 0.4mm nozzle.
All faces will print and have been tested. The Boros still needs some tweaking to be as good as the others and you will need to play around with the print orientation to keep most of the detail.
I have included, all 10 guilds, a complelely blank side, and a blank side with a circle, if you want to add some other symbols to it.
You will need to print
- 2 Number Rings
- 1 Shaft
- 2 Sides of your choice
- 1 spacer ring
I printed the sides, flat with the guild symbol face up and supports. Changing the print orientation of the other pieces should mean you don't need supports.
0.4mm nozle was used.