The models of the barrels golem, a monster created by me. There are 2 different versions, one with a crossbow and one with an hammer.
The model have to be scaled 10x, to be 28mm scale.
After the printing, it coul be glued on a 25mm base (file not included here).
For more about my works, you can visit my site: https://www.fede3dworkshop.com
They needs brim.
It can be printed a 0.1mm or 0.2mm, but the 0.1mm heigh layer is more detailed.
The ones in photos are printed with 0.1mm layer.