I designed this beadlock wheel to fit the tires on the WPL line of vehicles. I used a tire from the WPL C14 kit to model the wheel. Each wheel uses 6 M3x8mm screws to assemble. I used pan head type screws. I used M3 because that is what is readily available at most hardware stores. The screw holes were a little tight. I found it best to drill out the holes on the back half so that the M3 screws were able to rotate freely then screw into the holes on the front half. This made for the easiest assembly. I will update the file soon so that no drilling is necessary.
If you discover changes are necessary, let me know and I will update.
You DO NOT have permission to sell parts made with this .stl file. If you do not have a 3D printer at your disposal and would like a set of wheels, contact me.
Thank you and enjoy.
Made the inner ring wider.