This is a shock tower for the WPL line of RC vehicles such as the C14, C24, B1, etc.
This shock tower mounts on the chassis rail and extends upward approximately 3mm higher than the stock shock mounts. It allows for the use of 60mm hobby grade shocks without changing ride height. There will be minor body modification necessary for fitment and clearance. With proper install, the body should be able to ride in the original position.
If you have suggestions on how to improve this part, please let me know.
You DO NOT have permission to sell parts made using this file.
If you do not have a 3D printer or a friend near you who could print for you and would like to have this part printed, contact me.
Thank you and enjoy.
One face has an offset where it sits against the frame rail. That face is the "back" of the part. Lay the "front" flat on the printer. This will give you the strongest part possible and avoid the need for support.