These upgrade parts for the "Woodpecker CNC 3018" and similar engraving machines (1610, 2418) are designed to secure the wires to the tool head and prevent them from moving when it moves, hence preventing damage to the wires.
Printed on a heavily modified Anet A8.
Attaching to the tool head
To attach the parts to the cutter head you will need:
- 4x M3 x 35 mm machine screws
Remove the four screws that hold on the rear cover of the stepper motor.
Place the parts in place.
- Put the new 35 mm screws through the parts and into the stepper motor and re-tighten ensuring you have not disturbed the position of the rear motor cover.
The position of the two parts