Just a simple 1 hour design project to make a hook for my doors, so we can put clothes/ hangers on it.
- Door thickness 44-45mm
- 4 hangers space
- Max. load approx. 2kg
- PLA usable design
- 6-7hrs print with 30% infill
- Indoor use (PLA) mainly
- Have sharp corners (Safety caution: Persons taller than 1.8meter body height may get injury if hitting/smashed onto it)
- Tolerance left for summer expansion considered to the door gap.
- FreeCAD file available for customization (Changes can be made in "Sketch")
Detail print setting can make reference to the .txt inside the RAR