Seeing lots of people using dedicated bracket to silence their printer, I decided to design my own.
Things are supposed to be printed with highly flexible TPU or TPE.
Mount flat square side on motor
Use M3 part with screws. (x4 / flat)
Replace your screws if needed with +3 mm at least added lengh.
NOTE : I do prefer OBJ or Step File in order for other people make modification with ease.
Added new lightened version. better use of material elasticity. printed with ninjatek ninjaflex a breeze.
For Z axe I tried https://www.thingiverse.com/thing:2925230 but doesn't align Motor axis and T8 Z Rod.
EdIt : After some experiments, I have validate that this thing give better results, with non homogene scaling and Z at 150% (2.4 mm thick).
obtaining a better thickness for work in wider elasticity range.
even less noises.
Use 0.8 mm thick wall with 0.4 nozzle
TESTED : so this is the good shore to do it 85A.
The light version work better.
For infill, I uncheck infill and uses 5* 0.4 shell instead.