See the Fusion 360 file for how I designed it.
- 6 metal rods with a 5mm diameter and a length of about 30mm
- 3D printed spinner
- Caps (optional)
- 1 608 bearing
- Glue (optional)
The holes for the rods are 5.1mm in diameter, and the bearing hole is exactly 22mm.
How to Assemble:
- Insert bearing and rods into spinner. Glue if needed.
- Insert caps if desired. Glue if needed.
- Done! :D
Be careful if the rods are loose, once I spun it fast and a rod flew out and almost dented my wall. If it's loose, PLEASE glue it in so you don't dent walls or crack glass.